pikkerton Logo
ZBS-122

Datasheet

Multisensor for Temperature, rel. Humidity, Motion Detection, Air-Pressure, Brightness, CO2

ZBS-122 - ZigBee
MBS-122 - wireless M-Bus

pikkerton Logo
ZBS-122

Features:

  • Temperature (up to 0.3°C; resolution 0.1°C on demand)
  • PIR Motion Detection (/FS only)
  • Presence Detection / Alert (avoids continiously sent motion detection telegrams, /FS only)
  • Rel. Humidity
  • Brightness (/FS only)
  • Static Air Pressure (/FS only)
  • CO2 (/CO2 only)
  • Very flexible battery configuration up to 3x 3.6V Lithium in parallel, leading to approx. 9000 mAh and battery lifetimes up to 10 years.
  • OGEMA-Driver on demand (Open Gateway Energy Management Alliance)


Ultra low power operation

Though the device can sample in quite small cycles, a couple of µA (thousandth of a Milliamp) are enough for a long-term and reliable operation. After the internal sampling / measurement all internal sensors are cut off from the power supply leading to absolute zero current consumption. Flexible configurable thresholds (high / low) for all sensors will lead to immediate alarm telegrams only in case of violation. This approach combines almost realtime data with the longest battery lifetime.

Long time before the battery gets empty, "Battery-Low" messages are sent in order to prevent connection loss and ensure reliable operation.


Technical data:

Maße
Standards ./.
LxBxH [mm] 107x52x15.5
107x52x15.5 mit Flansch
Material PC-V0, weiß
IP Schutzgrad IP20
Stromversorgung
Spannung extern a.A.
Anschluß extern a.A.
Intern 3x AA 1.5V oder kundenspezifische Konfiguration, s. Label
Stromverbrauch typ. konfigurationsabhängig
Schnittstellen / Sensorik

Temperatursensor
-40 °..+120 °C

+5..+60 °C: max. +/-0.4 °C, typ. +/- 0.3 °C
-40..+5 °C: max. +/-1.2 °C, typ. +/- 0.7 °C
+60..+120 °C: max. +/-1.6 °C, typ. +/- 0.8 °C
Luftfeuchtigkeit 0..100%

0..20% RH: max. +/-5%, typ. +/- 3%
20..80% RH: max. +/-4%, typ. +/- 2%
80..100% RH: max. +/-5%, typ. +/- 3%
Bewegungssensor (/FS) PIR, Reichweite ~6 m
Helligkeitssensor (/FS) 0..2000 lux, ~580 nm
Luftdruck (/FS) Relative Genauigkeit 950..1050 hPa: +/-0.12 hPa [25°C]
Absolute Genauigkeit 300..1100 hPa: -4.0/+2.0 hPa
CO2 (/CO2) 0.04...2% Vol. CO2
+/-0.02% Vol. CO2 +/-3% vom Meßwert
Umgebung
Temperatur Betrieb -10..60 °C
Rel. Luftfeuchte Betrieb nicht kondensierend
Lagerbedingungen -20..+60°C
Standards
Safety / EMV / Funk CE
Export
Warentarifnummer 9031 8038

Kommunikation ZigBee
Protokoll / Frequenz IEEE 802.15.4 ZigBee,  max. 250 KBit/s, ISM 2.4 GHz
Rolle / Modus Router
Max. direkt angemeldete End Nodes 20, mehr über zusätzliche Router
Sendeleistung +8 dBm (6 mW)
Empfangsempfindlichkeit -102 dBm
Antenne Intern, PCB
Verschlüsselung AES128

Kommunikation Wireless M-Bus (MBS-)
Protokoll / Frequenz OMS / Wireless M-Bus 868 MHz
Rolle / Modus Endgerät
Modus: T1
Sendeintervall:
60s permanentversorgt
300s batteriebetrieben
Sendeleistung +10 dBm
Empfangsempfindlichkeit -112 dBm
Antenne Interne Drahtantenne
Verschlüsselung

Kommunikation Wireless LAN
Protokoll / Frequenz IEEE 802.11. b/g/n (2,4-2,5 GHz)
Rolle / Modus Konfiguration: Access Point
Betrieb: Client
Sendeleistung max. +20 dBm
Empfangsempfindlichkeit max. -98 dBm
Antenne Interne PCB-Antenne
Verschlüsselung WEP, WPA, WPA2

Ordering / Options:

For testing purposes we have 2 standard configurations:
  • 75ZBS122: ZigBee Multisensor 2 (temperature, rel. humidity)
  • 75ZBS122/FS: Fully equipped (temperature, rel. humidity, PIR motion detection, brightness, air pressure, +8 dBm TX, -102 dBm RX)
  • 75ZBSCO2, ZigBee Multisensor with CO2 gas sensor, external power supply recommended, , ppm range 0,2/0,5/2%
  • Contact manufacturer for presence detection firmware


Due to the versatile configuration possibilities we can tailor your perfect customer-specific sensor device. Please contact our sales department for quotations.

Datum: 05.06.2013, Version: 2.0

Contact:


pikkerton GmbH
Wohlrabedamm 16
D-13629 Berlin
Germany
Tel.: +49 30 3300724-0
[image_l=473/]
made in germany
Used Technologies

Typical Applications
  • Industrial Automation
  • Home Automation
  • Temperature and Humidity Control for used and unused rooms
  • Flow control in pipes
  • Prevention of mildew
  • Monitoring of patients´ environment and activity
  • AAL - Ambient Assisted Living

Literature / Download
...can be found in Service & Support

Driver

made in germany
Datenblatt drucken

Kontakt  Impressum  | pikkerton GmbH - Telefon: +49.30.3300724-0
<